Buy online
Small friction hinges - adjustable
Small size friction hinge to maintain a lid / door in position.
The friction torque is adjustable with a hex key.
2 other versions available: with spring or with detent function.
Large friction hinges - adjustable
Large size friction hinge to maintain a lid / door in position.
The friction torque is adjustable with a hex key.
Available with a choice of studs or holes.
3 other versions available: with spring, with detent function or free swinging.
Hinges with or without friction in stainless steel - friction torque 3 N.m
Constant torque. Stable at various temperatures. (from -40°C to +80°C)
Pin in stainless steel.
Plugs in polyethylene.
Hinges with or without friction in stainless steel - friction torque 5 N.m
Constant torque. Stable at various temperatures (from -40° to 80°C).
Pin in stainless steel.
Plugs in polyethylene.
Hinges with or without friction in stainless steel - friction torque 8 N.m
Constant torque. Stable at various temperatures (from -40°C to +80°C).
Pin in stainless steel.
Plugs in polyethylene.
Hinges with or without friction in stainless steel - friction torque 4.5 N.m
Constant torque. Stable at various temperature (from -40°C to +80°C)
Pin in stainless steel.
Plugs in polyethylene.
One way torque hinge - constant torque 9 N.m / set
- Aluminium torque hinge.
- Friction in one direction only: allows for frictionless handling of the door inthe opposite direction.
- Tested over 30,000 cycles.
- Torque is constant in torque direction.
- Sold in pairs (left / right).
- Ideal to prevent shock to the door and / or safety.
- Torque moment (per set): 9 N.m.
- Initial torque may vary from -20% to +40%.
- Not suited for vibration environment.
- Torque will be affected by temperature.
- Do not lubricate.
- For indoor use only.
- Body in aluminium, shaft in stainless steel, sleeve and cover in polyacetal (POM).
Dual axis torque hinge - 30 x 60 mm
- Dual axis: free stop at any angle in tilt & swivel.
- Provide torque stability in both directions.
- Torque per piece (tilting): 2.9 N.m.
- Torque per piece (swiveling): 1.4 N.m.
- Suitable for monitor screens.
- Rotation upon axis X can occur from 0 ° to 180 °.
- Rotation upon axis Z can occur up to 360 °.
Produced mainly in stainless steel, for a complete description of the materials contact us.
Dual axis torque hinge - 50 x 76 mm
- Dual axis: free stop at any angle in tilt & swivel.
- Provide torque stability in both directions.
- Torque per piece (tilting): 7 N.m.
- Torque per piece (swiveling) 3 N.m.
- Suitable for monitor screens.
- Rotation upon axis X is free but can be blocked from 0° to 120° with a dditional pin.
-Rotation upon axis Z is free but can be blocked at 30° or 90° with additional pins (various holes in the fixing plate).
-Electric cables can go through a hole in the middle of the flixing plate.
Produced mainly in stainless steel, for a complete description of the materials contact us.
Swivel torque hinge - torque 2 N.m
Rotation angle: 360°.
Friction torque: 2 N.m.
For indoor applications (industrial control panels and monitors).
Swivel torque hinge with hole diameter 21.5 mm
Rotation angle: 360°.
Friction torque: 3 or 5 N.m.
Center hole for easy cable management.
For indoor applications (industrial control panels and monitors).
Produced mainly in stainless steel, for a complete description of the materials contact us.
Swivel torque hinge with hole diameter 34 mm - torque 7 N.m
Rotation angle: 360°.
Friction torque: 7 N.m.
Center hole for easy cable management.
For indoor applications (industrial control panels and monitors).
Produced mainly in stainless steel, for a complete description of the materials contact us.
Stainless steel torque hinge 2 N.m
A combination of plastic and metal is used for friction to prevent metallic dust.
For vertical and horizontal applications.
Cycle life: 20,000 cycles.
Operating temperature: -10°C / +40°C
Torque 2 N.m+/-25%
Produced mainly in stainless steel, for a complete description of the materials contact us.
Lift-off torque hinges
For vertical or horizontal applications.
Cycle life: 30,000 cycles.
14-7-3907 and 14-7-3906: torque 0.3 N.m +/- 67%
14-7-3904 and 14-7-3905: torque 1.6 N.m +/- 20%
Produced mainly in stainless steel, for a complete description of the materials contact us.
Torque hinge A
Provides torque stability in both directions.
For pair using: please use the same torque in both hinges.
When installing, ensure that both hinge axis are aligned.
Cycle life: 20,000 cycles.
Operating temperature: 0°C - 40°C.
For horizontal applications.
Torque hinge B
Provides torque stability in both directions.
For pair using: Please use the same torque in both hinges.
When installing, ensure that both hinge axis are aligned.
Can not be used around water because not all parts are made of stainless steel.
Cycle life: 20,000 cycles.
Operating temperature: 0°C - 40°C.
Hinges with dual function : Friction hinges
The range of friction hinges consists of small and large adjustable friction, with or without stainless steel friction, torque between 3N.m and 8N.m, stainless steel, hinges, unidirectional friction, 2 axis of rotation, pivot, rotary axis, rotary joint, mini hinges. They measure between 30mm and 115mm in length and between 16.5mm and 76mm. We offer several materials: aluminium 6060 T5, stainless steel 301, stainless steel 304, aluminium, stainless steel 430, POM. They are temperature-stable between -40° and +80°.