"Clip'n Turn - Clip-on quarter turn with wing head"
"This part number includes a body (POM) and a clip (PA).
3 cam heights available. Straight cam for heights H=18 and H=25 (as shown on the drawing).
Cranked cam for height H=13.5.
Product in white color: on demand.
This quarter turn can be mounted on door thicknesses up to:
- 4mm with part numbers 16-1-8001, 16-1-8003, 16-1-8008 and 16-1-8011.
- 6mm with part number 16-1-8005.
Clip can be ordered separately with part number 16-1-8007 (dimension 36x30mm).
Patented."
"Clip'n Turn - Clip-on quarter turn with tool operation"
"This part number includes a body (POM) and clip (PA).
3 cam heights available. Straight cam for heights H=18 and H=25.
Cranked cam for height H=13.5 (as shown below).
Product in white color: on demand.
This quarter turn can be mounted on door thicknesses up to:
- 4 mm with part numbers 16-1-8002, 16-1-8004, 16-1-8009 and 16-1-8010.
- 6 mm with part number 16-1-8006.
Clip can be ordered separately with part number 16-1-8007 (dimension 36x30mm).
Patented."
"Quarter turn with wing knob"
"16-1-4226: key 455 E, supplied with 2 keys.
2 cams available (sold separately):
16-1-4227: flat cam (H18 L35).
16-1-4229: cranked cam (H11 L50). Same came can be used upside down for H25.
Cut-out: 19.5 x 23.1 mm.
Door thickness: max. 12.5 mm.
Material: wing knob in black PA, housing in zinc die-cast, key / cylinder / cam in steel, nut in brass."
"Cylinder lock"
"Quarter-turn cylinder lock for maximum door thickness of 40 mm. Supplied with 2 keyed alike.
Not handed. Cam to be ordered separately."
"Rotary locks" : "Quarter turn"
The range of quarter turns consists of clip'n turn, quarter turn with wing knob, latch, lockable flush pop-out T-handle, cylinder lock. For the clip'n Turn cams we offer 3 heights: H=18, H=25, and H=13.5. These quarter turn can be used on panel thicknesses up to 6 mm. We offer several materials: POM, PA, zinc die, steel.